A Beginner’s Guide to Using NuBest Skin’s Advanced Skincare Devices

A Beginner’s Guide to Using NuBest Skin’s Advanced Skincare Devices

Cosmetics have advanced a lot and technology has been instrumental in enhancing the efficiency of the treatments. NuBest Skin currently has a line of professional skin care equipment for people to address various skin problems and take care of their skin at home. This guide will endeavor to give information on how to optimize the use of these devices. For all products, view at nubestskin.com website.

The Advanced Skincare Devices of NuBest Skin

The skincare devices that are available in NuBest Skin are intended to solve skin issues such as acne, skin dullness, fine lines, and wrinkles. These devices use current technologies like microcurrent, sonic cleaning, and light to deliver particular treatments that enhance skin tone.

Some of the most used devices include the ageLOC LumiSpa, the ageLOC Boost, and the ageLOC Galvanic Spa. Every of the devices has its purpose and knowing that purpose is helpful when one wishes to include the devices in their skin care regimen.

How to Use ageLOC LumiSpa

Preparation

Wash the face with warm water. To use the LumiSpa, one has to wet the silicone treatment head of the device and then apply a pea-sized amount of the LumiSpa Activating Cleanser.

Activation

Switch on the device and begin with the circular movements. The Micropulse Oscillation technology of the device will help in the peeling by removing the dirt, oil, and makeup on the skin during the treatment.

Timing

Apply circular movements on the face and let it remain for 2 minutes. This will be followed by vibration of the device after 30 seconds and you will have to transfer to the next zone.

Rinse

After the treatment, one should wash the face with warm water and then dry it gently with a clean towel. This should then be followed by a toner, serum, and then a moisturizer to help seal in the goodness. The ageLOC LumiSpa should be used in the morning and at night for glowing and youthful skin.

The ageLOC Boost: Improving Skin and Moisture

The ageLOC Boost is designed to enhance skin luminosity and moisturization with the use of the variable pulse microcurrent. This device is ideal for any person who wishes to increase the luminosity of the skin and eliminate the layer of keratinized cells. The Directions for the application of ageLOC Boost are as follows:

Preparation

This mask should be put on a clean skin and all the makeup and dirt should be washed off before putting on the mask. Squeeze a pea-sized amount of the ageLOC Boost Activating Serum apply it on the top of the head of the device and spread it in the palm of one’s hand.

Activation

Switch on the device and apply it to the skin with less pressure. The microcurrents will also assist in the penetration of the serum by the skin layers and get to the deeper layers of the skin.

Application

Move the device in large circular, up, and outward movements on the face, across the forehead, cheeks, and chin. All the sessions are of about two minutes in duration.

Completion

As is the case with most skin treatment procedures, it is recommended that you apply your daily lotion and sunscreen after using the device.

This ageLOC Boost should be used once daily preferably in the morning to give you the morning glow for the best results.

The ageLOC Galvanic Spa: Anti-aging treatments

The ageLOC Galvanic Spa is a more complicated device that is appropriate for those who have several skin problems simultaneously. It uses electrical currents to place charged treatment gels on the skin, for issues such as fine lines, wrinkles, and loss of skin tone.

How to Use ageLOC Galvanic Spa

Preparation

Wash the face with a mild soap and water and then wash and pat the skin. Spread the Pre-Treatment Gel all over the face.

Activation

Connect the right treatment head to the device and choose the required level according to the skin type and problem.

Application

Move the device over the face in a sweeping motion, along the planes of the face. It will employ galvanic currents to assist the active ingredients of the gel to penetrate the skin.

Treatment Gel

Following the pre-treatment, wash off the gel and apply the Treatment Gel. The same should be done to the device, this is to ensure that the face of the device is also equally covered.

Optimizing the Outcomes of NuBest Skin Devices

For the devices used by NuBest Skin to be most effective, it is essential to be as consistent as possible. When employed frequently with other skin care products, the skin will always be healthy, beautiful, and free from the ravages of aging.

It is also recommended to use good quality skincare products which should be used in conjunction with the devices. Also, the implementation of a healthy diet and proper hydration will complement the use of these advanced skincare devices.

Conclusion

NuBest Skin’s skincare devices are safe and efficient methods of attaining and maintaining beautiful skin. If properly used and in combination with each other, the devices offer the same skin care as one could get at a professional spa. Whether they are applied in the fight against acne, skin dullness, or the first signs of aging, these devices provide several choices to enhance the skin.